Q1. Appraise the Region of Convergence (ROC) of πΊπΊ(π§π§) + π»π»(π§π§) whose individual z-transforms are those of causal signals and their ROCs are given as:
(a) |π§π§| > 0.45
(b) |π§π§| > 0.5
(c) |π§π§| > 0.9
(d) 0.5 < |π§π§| < 0.9
(e) 0.5 < |π§π§| < 4.5
Q2. Identify the TRUE statement below.
(a) A discrete-time system if evaluated to be dynamic is said to possess memory.
(b) A linear system is one that violates the superposition principle.
(c) A system is time invariant if its input-output characteristics change with
time.
(d) Unstable systems usually exhibit erratic and extreme behaviour but seldom cause overflow
(e) A causal system is said to be one where the output at any time, n, depends on past, present and future inputs.
Q3. The one-sided exponential sequence,Β 17 ππ , ππ β₯ 0, will have its sum of components, βΒ 1 17 ππ β ππ=0 converging to:
Q4. Select the element that describes the picture of Figure Q4 below.
(a) n-Unit Advance Element
(b) Quintuple Unit Delay Element
(c) 5n samples advance element
(d) 5n samples delay element
(e) n-Unit Delay Element
where ππ is an integer
Q5. A digital video camera captures an image signal onto its CMOS sensor plate with the following characteristics:
(a) One-dimensional, multichannel, discrete-time
(b) Multi-dimensional, single channel, continuous-time
(c) Multi-dimensional, single channel, discrete-time
(d) One dimensional, single channel, discrete-time
(e) One dimensional, multi-channel, continuous-time
Q6. An amplitude modulated (AM) waveform has a spectrum shown in Figure Q6. Debate the optimum sampling frequency that should be employed should the AM signal be first digitized then sent over a digital network?
(a) The sampling frequency should be at least 2 kHz.
(b) The sampling frequency can be greater than 2 kHz.
(c) The sampling frequency should be at least twice the highest frequency of the upperside band.
(d) The sampling frequency should be greater than highest frequencies of both the lower and upper sidebands by such a margin so as to avoid frequency aliasing.
(e) Any of the above sampling strategies will work
Q7. Construct the assumed form of the particular solution to the following second order difference equation:
π¦π¦[ππ] β 3π¦π¦[ππ β 1] β 10π¦π¦[ππ β 2] = π₯π₯[ππ] + 6π₯π₯[ππ β 1],
when the following input sequence is applied: π₯π₯[ππ] = 5πππ’π’[ππ],
(a) π¦π¦ππ[ππ] = πΆπΆ3ππ(5)πππ’π’[ππ]
(b) π¦π¦ππ[ππ] = πΆπΆ1(1)ππ + πΆπΆ2(2)ππ
(c) π¦π¦ππ[ππ] = πΆπΆ1(β2)ππ + πΆπΆ2(5)ππ + πΆπΆ3ππ(5)πππ’π’[ππ]
(d) π¦π¦ππ[ππ] = πΆπΆ3(5)πππ’π’[ππ]
(e) π¦π¦ππ[ππ] = πΆπΆ1(β2)ππ + πΆπΆ2(5)ππ
Noting that πΆπΆ1, πΆπΆ2 and πΆπΆ3 are arbitrary constants.
Q8. Select from the choice(s) below, the type of time-domain signal whose frequency spectra is given by the following analysis equation:
(a) Continuous-time and periodic signal
(b) Discrete-time and periodic signal
(c) Discrete-time and periodic spectrum
(d) Continuous-time and aperiodic signal
(e) Discrete frequency and aperiodic spectrum
Q9. Solve for the complex spectrum of the following signal, as a function of frequency, f
Q10. Evaluate the period of the following discrete-time signal:
(a) 210 samples
(b) 105 samples
(c) 7 samples
(d) 5 samples
(e) 3 samples
Q11. Appraise the Region of Convergence (ROC) of πΊπΊ(π§π§) + π»π»(π§π§) whose individual z-transforms are those of causal signals and their ROCs are given as:
(a) |π§π§| > 0.21
(b) |π§π§| > 0.3
(c) 0.3 < |π§π§| < 4.9
(d) 0.3 < |π§π§| < 0.7
(e) |π§π§| > 0.7
Q12. Identify the TRUE statement below.
(a) A discrete-time system if evaluated to be dynamic is said to possess no memory.
(b) A linear system is one that obeys the superposition principle.
(c) A system is time-invariant if its input-output characteristics change with time occasionally, but otherwise remain the same.
(d) Unstable systems usually exhibit orderly behavior and seldom cause
overflow
(e) A causal system is said to be one where the output at any time, n, depends on present and future inputs.
Q14. Select the element that describes the picture of Figure Q14 below
(a) n-Unit Advance Element
(b) Quadruple Unit Delay Element
(c) Quadruple Unit advance element
(d) 4n samples delay element
(e) n-Unit Delay Element
where ππ is an integer.
Q15. A Dolby THX encoded system captures a discrete-time signal which is:
(a) Multi-dimensional, multichannel, discrete time
(b) Multi-dimensional, single channel, continuous-time
(c) Multi-dimensional, multi channel, continuous-time
(d) One dimensional, single channel, discrete-time
(e) One dimensional, multi-channel, continuous-time
Q16. An amplitude modulated (AM) waveform has a spectrum shown in Figure Q16. Debate the optimum sampling frequency that should be employed should the AM signal be first digitized then sent over a digital network?
(a) The sampling frequency should be at least 10 kHz.
(b) The sampling frequency can be greater than 10 kHz.
(c) The sampling frequency should be at least twice the highest frequency of the upperside band.
(d) The sampling frequency should be greater than highest frequencies of both the lower and upper sidebands by such a margin so as to avoid frequency aliasing.
(e) Any of the above sampling strategies will work.
Q17. Construct the assumed form of the total solution to the following second order difference equation:
Q18. Select from the choice(s) below, the type of time-domain signal whose the following analysis equation gives frequency spectra:
(a) Discrete-time and periodic signal
(b) Continuous-time and periodic signal
(c) Discrete-time and periodic spectrum
(d) Continuous-time and aperiodic signal
(e) Discrete frequency and aperiodic spectrum
Q19. Solve for the magnitude spectrum of the following signal, as a function of frequency, f
Q20. Evaluate the period of the following discrete-time signal:
Q21. A stereophonic (2-channel) audio system with a dynamic range of 10 volts recorded an hour long music album using a 24 bit, 44,1 kHz analogue-to-digital converter.
Determine the bit rate and the highest frequency component that can be sampled without aliasing as well as the resolution of the stored signals. What is the total data stored in the disk in bytes?
Q22 (a) Write down an expression in terms of z of a discrete-time transfer function containing 9 zeros located at the origin and 7 poles equally spaced out in angular distance at a radial distance of 0.7 units from the origin.
Q23. A tri-channel seismic sensor with a dynamic range of 10 volts recorded amplitude vibration signals at 40 samples per second using a 12-bit linear quantization analog-to-digital converter. Determine the bit rate and the
highest frequency component that can be sampled without aliasing as well as the resolution of the stored signals. What is the hourly data rate sent?
Q24 (a) Write down an expression in terms of z of a discrete-time transfer a function containing 5 poles located at the origin and 8 zeros equally spaced out in angular distance along the unit circle.
Buy Custom Answer of This Assessment & Raise Your Grades
The post ENG311: Appraise the Region of Convergence (ROC) of πΊπΊ(π§π§) + π»π»(π§π§) whose individual z transforms are those of causal signals and their ROCs are given as: Digital Signal Processing Assignment, SUSS appeared first on Singapore Assignment Help.
